
SUNOLUB OF45 cutting oil is a transparent liquid with a brown color and a flash point of 130 degrees Celsius.
Caution
The information provided on this datasheet is intended to inform you about safety and health considerations regarding chemical substances. We recommend referring to the MSDS (Material Safety Data Sheet) of each substance before use or contact. Please handle and store this datasheet carefully and encourage your colleagues to read it.
Specifications
Safety Warnings
First Aid Measures
Fire Extinguishing
Contact Controls
Environmental Protection
Specifications
Physical and Chemical Properties
Appearance | Transparent liquid |
Color | Brown |
Odor | Has an odor |
Refractive Index | 73 |
pH (3% in hard water) | 0.2 ± 9.2 |
Viscosity at 40°C | CP 5± 65 |
Density at 40°C | 0.93 |
Flash Point (F.P) | 200 degrees Celsius |
Ignition Point | 130 degrees Celsius |
Solubility in hard water (300 ppm) | Soluble in white and creamy emulsion/stability for 24 hours |
Solubility in hard water (1000 ppm) | Soluble in white and creamy emulsion/stability for 24 hours |
Stability Test at 5 degrees Celsius | Becomes turbid |
Stability Test at 45 degrees Celsius | No change |
Safety Warnings
Eye Contact | Contact with the eyes can cause irritation and burning. |
Skin Contact | Contact with the skin can cause mild irritation and burning. |
Ingestion | Ingesting the substance can cause harm to the lungs and digestive system. |
First Aid Measures
Eye Contact | After removing contact lenses, immediately rinse the eyes with plenty of cold water for 15 minutes. Keep the eyelids open and consult a doctor. |
Skin Contact | Remove contaminated clothing. Wash the skin with soap and water for 15 minutes to remove any contamination. If inflammation occurs, seek medical attention. |
Ingestion | Never give anything to an unconscious person. Do not induce vomiting. Seek medical attention immediately. |
Fire Extinguishing
Flammability | It is flammable in the presence of strong oxidizers and direct flame. |
Suitable Fire Extinguishing Agents | Water spray, CO2, dry chemical powder, or foam. |
Contact Controls
Protective clothing – Mask – Safety shoes – Safety glasses – Safety gloves.
The use of splash goggles and safety showers in the work environment with this substance is essential.
Environmental Protection
Leakage
| Collect spilled liquid using appropriate tools and place it in a waste container. Clean the contaminated area with clean water. |
Waste disposal | Follow local and national regulations. If it is not possible to store or recycle these materials, use management methods for disposal. |